|
Meaning of the configuration code first block |
|
Number of flashes Block 1: |
|
Configuration: |
|
2 |
|
ABS unit |
|
3 |
|
ABS unit with ASR – MR |
|
4 |
|
ABS unit with ASR – BR (on shaft 3) |
|
5 |
|
ABS unit with braking and engine controller (on shaft 3) |
|
7 |
|
ABS unit with braking and engine controller (on shaft 2) |
|
Notes: |
- Configuration 5 on SETRA SG 321 UL
- Configuration 7 on SETRA S 319 UL, S 319 NF and Integro O 550 over/15m
- If a control unit is renewed, the configuration must be changed. This can be changed on the vehicle.
The procedure corresponds to clearing the fault memory (see "Clear fault memory").
|
|
Meaning of the configuration code second block |
|
Number of flashes Block 2: |
|
Configuration: |
|
2 |
|
IRM on front shaft, IR on shaft 3 |
|
4 |
|
SL on front shaft, IR on shaft 3 |
|
6 |
|
IRM on front shaft, SL on shaft 3 |
|
8 |
|
SL on front shaft, SL on shaft 3 |